Error Code: EC 0d – Outdoor Unit Malfunction
What this means:
The indoor unit has detected that the outdoor unit is not functioning correctly. This is a general communication or operational fault and may be caused by a deeper issue in the outdoor main board or one of its subsystems.
Try this first (quick reset):
Turn off the power to the entire system.
Wait 2 full minutes.
Turn the unit back on and observe the outdoor unit.
If the outdoor PCB displays a specific error code after restart — follow that code’s diagnostic procedure.
If no error is shown, and the issue persists — continue troubleshooting.
Next steps (for technicians):
Power cycle the outdoor unit and watch the main board during startup.
If an error code appears on the outdoor PCB after a few minutes → follow the prescribed steps for that specific error.
If no code is shown but the indoor unit still reports EC 0d, consider replacing the outdoor PCB.
What you might need:
Outdoor unit (or replacement outdoor PCB)
Diagnostic tools for checking outdoor communication lines
Helpful tip:
This is a general fault code that typically leads to a more specific outdoor unit error after a restart. Always power cycle and observe the outdoor board before beginning part replacement.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article